To add tool kit options go to the "RV TOOL KIT OPTIONS" link on the left and select desired options to add to cart.

Our NEW RV-12 Tool Kit was developed per our own internal build RV-12 project. The basic tool kit covers all sheet metal requirements and contains the highest quality aircraft tools, the same as our standard RV Tool Kits. Photo may be different that actual kit. See the detail list of items below for kit contents. Vans specified mechanic tools are available as an option (required later in the build process). Vans specified tubing tools are available as an option (required later in the build process). Other aircraft tools not required per Vans Aircraft are available as options. Some common items (not aircraft tools) at the end of the this list are readily available at your local hardware store. RV-12 Sheet Metal Tool Kit Includes:
UPGRADED HYDRO POWER PNEUMATIC POP RIVETER*
PALM AIR DRILL – 3600 RPM*
PNEUMATIC DIE GRINDER*
DIE GRINDER ACCESSORY PACK
350 EACH, 1/8 CLECOS, COPPER*
50 EACH, 3/32 CLECOS, SILVER*
3/32 RIVET DIMPLE DIE SET*
3/32 SPECIAL RV-12 SMALL DIAMETER FEMALE RIVET DIE*
1/8 PROTRUDING HEAD RIVET SET*
1/8 RIVET DIMPLE DIE SET (100-DEGREE)*
#8 SCREW DIMPLE DIE SET, USA*
FLUSH HEAD RIVET SET (SHORT 1/8" THICK)*
FLUSH HEAD RIVET SET (TALL 1/2" THICK)*
DRILL STOPS (SET OF 4)
#3 COBALT AVIATION DRILL BIT
#11 COBALT AVIATION DRILL BIT
2 EACH, #12 COBALT AVIATION DRILL BIT
#16 COBALT AVIATION DRILL BIT
2 EACH, #19 COBALT AVIATION DRILL BIT
#27 COBALT AVIATION DRILL BIT
3 EACH, #30 COBALT AVIATION DRILL BIT
12" #30 EXTENSION DRILL BIT
#36 COBALT AVIATION DRILL BIT
5 EACH, #40 COBALT AVIATION DRILL BIT
#52 COBALT DRILL BIT
1/4" COBALT AVIATION DRILL BIT
5/16 COBALT AVIATION DRILL BIT
11/32 COBALT AVIATION DRILL BIT
3/8" COBALT AVIATION DRILL BIT
UNIBIT STEP DRILL*
100 DEG MACHINE COUNTERSINK CUTTER WITH #27 PILOT*
120 DEG MACHINE COUNTERSINK CUTTER WITH #30 PILOT*
100 DEG MACHINE COUNTERSINK CUTTER WITH #30 PILOT*
100 DEG MACHINE COUNTERSINK CUTTER WITH #40 PILOT*
COUNTERSINK CAGE*
1/4-28 DRILL EXTENSION (SUICIDE COUNTERSINK)*
1/4-28 TAP
3/8-16 TAP
3/8-24 TAP
6-32 TAP
TAP HANDLES, 3-PC SET*
SMOOTH FILE SET*
CLOSE QUARTERS HAND RIVET PULLER FOR TIGHT SPACES*
HAND SOLID RIVET SQUEEZER WITH 3" YOKE*
FLUTING PLIERS*
CLECO PLIERS*
EDGE ROLLER SEAMER*
OFFSET LEFT METAL CUTTING SNIPS, RED*
OFFSET RIGHT METAL CUTTING SNIPS, GREEN*
SOFT FACED DEAD BLOW HAMMER*
SPEED DEBURRING TOOL*
MULTI PENCIL DEBURRING TOOL
4 EACH FINE SCOTCH BRITE PADS
4 EACH ½” JAW CLAMP CLECOS
4 EACH 1” JAW CLAMP CLECOS
4 EACH 5/32” CLECOS
4 EACH 3/16” CLECOS
12" MACHINIST RULE
AWL
* = Lifetime Warranty

OPTIONAL TUBING TOOLS INCLUDE:
TUBING CUTTER
PRO TUBING BENDER
AVIATION ROL-AIRE FLARING TOOL

OPTIONS NOT REQUIRED BY VANS:
SAFETY GLASSES (OPTIONAL)
DIMPLE DIE ORGANIZER (OPTIONAL)
#27 PLEXIGLASS DRILL BIT (OPTIONAL)
#40 PLEXIGLASS DRILL BIT (OPTIONAL)
¼” REAMER (OPTIONAL)

TOOLS TO PURCHASE LOCALLY AT YOUR HARDWARE STORE:
1X6" BENCH VISE
SMALL 2" C-CLAMPS
SPRING OR PONY CLAMPS
FISH SCALE
BATTERY POWERED DRILL MOTOR