Home

Catalog On-Line

Search

Contact

Aircraft Builder & Mechanic Library

Site Map

TracerMarker

Aerospace Cost Saving Tool

• Easily duplicates accurate hole locations
• Works where traditional hole location tools are difficult to use
• Eliminates the cost of expensive shop aids and templates
• Significantly reduces shop time required for locating tools
• Eliminates costly mistakes for mis-located hole patterns in parts

P/N               PILOT DIAMETER               QTY IN PACK

STPK           ALL BELOW                         108 (12 SIZES)

STM4136    .1285 - .1360                          100 EACH

STM4147    .1406 - .1470                          100 EACH

STM5166    .1580 - .1660                          100 EACH

STM5173    .1690 - .1730                          100 EACH

STM5182    .1760 - .1820                          100 EACH

STM6193    .1910 - .1935                          100 EACH

STM6203    .1960 - .2031                          100 EACH

STM6209    .2050 - .2090                          100 EACH

STM 4257   .2500 - .2570                          100 EACH

$29.95 PER PACKAGE AS LISTED ABOVE.  CUSTOM SIZES AVAILABLE ON REQUEST.

TracerMarker Specifications

===================================================

Technical instructions:

1.  Place pilot into holes to be copied.

2.  Remove backing to expose self-stick adhesive surface.

3.  Place new part in position and press to cause the TracerMarker to adhere to the new part.

4.  Remove new part and tap all TracerMarkers with a hammer to create a center punch mark for each hole.

5.  Remove the TracerMarkers from the part to reveal the new hold locations for drilling.

US Patent No. 6">

PlaneTools.com

Home Catalog On-Line Search Contact Aircraft Builder & Mechanic Library Site Map   TracerMarker Aerospace Cost Saving Tool Easily duplicates accurate hole locations Works where traditional hole location tools are difficult to use Eliminates the cost of expensive shop aids and templates Significantly reduces shop time required for locating tools Eliminates costly mistakes for mis-located hole patterns in parts P/N               PILOT DIAMETER               QTY IN PACK STPK           ALL BELOW                         108 (12 SIZES) STM4136    .1285 - .1360                          100 EACH STM4147    .1406 - .1470                          100 EACH STM5166    .1580 - .1660                          100 EACH STM5173    .1690 - .1730                          100 EACH STM5182    .1760 - .1820                          100 EACH STM6193    .1910 - .1935                          100 EACH STM6203    .1960 - .2031                          100 EACH STM6209    .2050 - .2090                          100 EACH STM 4257   .2500 - .2570                          100 EACH $29.95 PER PACKAGE AS LISTED ABOVE.  CUSTOM SIZES AVAILABLE ON REQUEST. TracerMarker Specifications =================================================== Technical instructions: 1.  Place pilot into holes to be copied. 2.  Remove backing to expose self-stick adhesive surface. 3.  Place new part in position and press to cause the TracerMarker to adhere to the new part. 4.  Remove new part and tap all TracerMarkers with a hammer to create a center punch mark for each hole. 5.  Remove the TracerMarkers from the part to reveal the new hold locations for drilling. US Patent No. 6,796,051 B2     Isham Inc.